June 11, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Pink Transmission Distance: 8
This print uses 5 unique filaments. Substitute as needed.
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Gray
At layer #13 (1.12mm) swap to Jade White
At layer #17 (1.44mm) swap to Black
At layer #19 (1.6mm) swap to Pink for the rest.
License:
Standard Digital File License
Corp
