SWITCH LABO钢琴1.0-Nintendo switch LABO piano Ver1.0

这个钢琴只能配合任天堂SWITCH游戏机和LABO游戏卡带使用，本身不具有发音功能。

This piano can only be used with Nintendo Switch and LABO game cartridges. it does not have the ability to pronounce itself.

部分零件较大，A1mini摆不下。

A1mini可以尝试在切片软件中将零件切成两部分，打印完成后使用胶水粘接。我没有这样试过，可能会因为贴合有缝隙粘不紧。

Some parts are out of the A1mini size.

The A1mini can try to cut large parts into two parts in the slicing software and glue them together after printing. I haven't tried this way, and it may not be successful because of a gap in the fit.

白键建议使用50%填充，其他零件使用0.2mm默认配置即可

It is recommended to use 50% filling for white keys, and 0.2mm default configuration for other parts is sufficient.

下图部分用胶水粘接，其他零件不建议使用胶水。注意joy-con插槽的方向。

The parts in the image below are glued together, and glue is not recommended for other parts.

Pay attention to the direction of the joy-con slot.

需要用到如下配件：

The following accessories are required.

1.反光贴纸(最好是任天堂LABO原装的，非原装的要买亮度高点的，否则可能不起作用)

Reflective stickers (preferably Nintendo LABO original, non-original ones should be bought with high brightness, otherwise it may not work)

键盘背后和旋钮有凹槽示意贴纸位置

There are grooves on the back of the keyboard and knobs to indicate the position of the sticker

琴键背后的贴纸需要在游戏中根据使用效果调整位置。例如，你按下3却触发了4，则需要将3的贴纸位置往左调。

The stickers on the back of the keys need to be adjusted in-game to match the effects of use. For example, if pressing 3 triggers 4, you need to adjust the position of the sticker of 3 to the left.
 

2.橡皮筋4条

4 rubber bands

3.海绵胶带（它的作用是消除按键时的摩擦声）

Sponge tape (it works to eliminate the friction sound when the keys are pressed)

白键全部要贴海绵，黑键不需要。

All white keys should be sponge taped, black keys are not.