Batsignal (From movie: The Dark Knight Rises, 2012)

---------------------UPDATE--------------------- August 25, 2018. First of all I have to thank to the huge amount of positive comments received during the last months. Still freaks me out every time someone posts their make and I realize it is the same geometry I designed in my computer, vertex by vertex. Thank you very much to everybody showing support by comments, suggestions or even critics. You all helped to improve it to this final version. I have tried to include most of the suggestions received in this update and I hope everyone still thinking on printing this piece find it much more easy now, with less post-printing modifications and clearer instructions. All STL files have been updated, including the splitted pieces in single ones for big print beds and tall printers. Also all pieces containing custom supports have been included without supports as well. Those have been identified as CS for custom supports, and NS for no support at the end of the file name. Be sure not to print both and choose what you prefer. The guide image have been properly updated and all pieces have been identified with their respective name. Note red names for CS and yellow ones for NS. As said before, note as well sets of pieces A and B, and also E and F, which have been included as piece EF as a single piece. Please keep adding comments or suggestions in the comments section as I'm willing to create a version as perfect as possible for 3D printing. Also, don't be shy, whatever it is the final results, post it, we all want to see it, specially myself. Thanks everybody again. Enjoy it! ---------------------END OF UPDATE--------------------- The model represents the Batsignal as seen in the original movie "The Dark Knight Rises" from 2012. It has been modelled at a 1:8 scale approximately according to Batman height estimations, nevertheless it can probably be scaled up. Scaling it down will probably need severe post printing modifications. If you like the model, please take a second to consider tiping me, just on the left side of your screen. Modelling and preparation for 3d printing took around 20 hours. Just the 3d printing itself took around 65 hours, and sanding, painting and weathering have taken countless hours of work, I'd say more than 100 easily. For preparing the files for Thingiverse, the instructions manual and the updated files just for you all, add a few dozens of hours more. Take a look again at the pictures and leave a comment about if it is worthy. If you want a copy of the blueprint, just let me know by private message! It makes the perfect partner for the 3d printed Batsignal. And sorry, it is not free. Several non-printed elements have been used: - 1x MicroUSB female terminal. - 1x 3.3V voltage regulator. - 1x 1W LED + Aluminum heat sink. - 1mm cable for wiring, aproximately 30 cm (12 inches). - 12x M3 screws with different lenghts. - 14x M3 nuts. - 2x M6 bolts for attaching the frame to the base. - A ton of M2 screws with half round head and hex socket (approximattely 40-50) - 1x 3 pin slide switch. - Transparent 400 micron acetate sheet. All these components can be bought in several places as well as in Aliexpress with international shipping. The wiring scheme is sketched in the assembly instructions. As an alternative, the electric box was designed to fit a 3xAAA battery holder. The decision to use USB or batteries is up to you! I will include more details as questions appear in the comments, otherwise I think there is not too much to say. Thank you for passing by. Print, share and enjoy. The first one to get a picture on a foggy night with the batsignal will get a token from me ;) It is really hard to find fog in the cities nowadays.