June 30, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Magenta Transmission Distance: 7.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Green Transmission Distance: 2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Magenta
At layer #11 (0.96mm) swap to Jade White
At layer #16 (1.36mm) swap to Black
At layer #19 (1.6mm) swap to Green
At layer #21 (1.76mm) swap to Jade White for the rest.
License:
BY-NC-SA
ENO3D
