Syringe (Fully 3D Printed)

Introduction

A simple small, fully 3D Printed syringe for viscous materials. As the seal between the parts is not 100% tight, it is recommended to not use liquid materials. Possible use-cases are e.g. Epoxy Resin, Silicone, Liquid soap (may be to thin)…

 

Materials

• Filament: Any (Hard) - PLA, PETG, ABS, ASA, …

Boost Me:]

Setup

1. Choose Color
2. Print
3. Fill the syringe with the material
4. Insert the Plunger
5. Done! Apply force to press out material

Let me know if there is anything to change! Have fun with it :)