These use a friction fit to stay in the up and down position and can wear out over time
The sights should be a snug fit on your picatinny rails and be locked in place with a printed pin. If too tight or too loose for your rail, slightly scale all parts up or down.
Non adjustable.
Will co-witness most standard height optics.
Recommended to print with a very fine layer height. 0.08mm used in print profile.
Print Locker
![[The Original] the finger iron sights (PLEASE LIKE IF YOU DOWNLOAD GUYS if thay are lose scale down by 1-5%) preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/0b/05/35/bf/77/70714526_2601322836578667_3789841127234863104_n.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/0b/05/35/bf/77/70714526_2601322836578667_3789841127234863104_n.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "[The Original] the finger iron sights (PLEASE LIKE IF YOU DOWNLOAD GUYS if thay are lose scale down by 1-5%) preview image")
