July 27, 2024
Description
Greetings fellow adventurers,
For those of you wanting a fully customized D12, I present the “D12 kitcard V3”.
This upgraded version allows you to pick whichever color you want for the faces, numbers and edges. For the edges you can even go for a checkered look.
The main print profiles (see listed below) feature 4 colors. 1 color for all faces, 1 color for all numbers & 2 colors for the checkered edges. But the 3mf features separate parts for all elements, allowing you to customize to your hearts content (alternating colors for the faces or numbers, checkered or single color edges etc.)
This version (V3) features the standard layout of which the opposite sides sum to 13:
1 surrounded by 4-6-5-10-2
12 surrounded by 9-11-3-8-7
If you just want a duo color D12 with the just the numbers in a different color or a single color D12 take a look at the “D12 kitcard V2”:
https://makerworld.com/en/models/559955#profileId-479191
Assembly Instructions (no glue required):
1. Carefully remove each piece from the frame.
2. Gently bend the long face-pieces into shape.
3. Slide the 8-face of the die into the grooves of 2 & 4-face of the die.
4. Then go around connecting the other faces of the top and bottom part.
5. Place the 12-face on the top, aligned with the 9-face as shown below.
6. Place the 1-face on the bottom, aligned with the 4-face as shown below.
And there you have your new D12!
Boost MeRoll for boost!
Options:
In the print profiles you will find the following options:
Materials:
All these were printed in pla.
License:
Standard Digital File License
Tjoene
