Lettuce Coaster - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x83.72mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Mistletoe Green Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Charcoal Black
At layer #9 (0.8mm) swap to Soda Green
At layer #12 (1.04mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.