December 28, 2021
Description
Market stall and baskets sized for Sylvanian families or Playmobil. There are links to most of the wares int the picture and to also to a Cash register, coins, extra baskets and stands below.
Special thanks to Thingiverse user ritabunny who sent pictures and ideas to use as inspiration!
Description
The booth has 4 main parts which stays together without glue. The awning can either be printed in parts to get a multi-colored awning, or as just one or two pieces. The awning doesn't need to be glued but it's probably best to glue the different awning parts together if they are printed separately. No glue has been used for the market booth in the printed pictures.
Wares & stuff
Cash register, coins, extra baskets and stands
Lettuce, carrots, potatoes and onion are from my "Vegetable garden"
Buns are from my "Cakes and biscuits" set
Also see this nice looking Jar and this make by RitaBunny for more ideas on how to improve the market stall.
Pumpkin by KellyBC
The Yellow Pepper by AmazingDesign
The Corn by AmazingDesign
Corn on the Cob by JamesWhite (I mirrored the parts, combined them and printed in one piece)
Pear by Nat.Net (I reinforced the stalk a bit)
The banana I got from 3D paint but I'm sure there are many to find on Thingiverse too.
I used supports for the main stand part but I am not sure that is actually needed. Print the awning standing on the side to avoid having to use support (gluing the print bed is recommended).
I have tried both printing the awning as separate parts and as one part. Painting nice looking stripes is a little bit tricky when printing as one part so I think I preferred printing them as separate parts and then gluing them together, they seem to hold together quite well (don't use too much glue).
The parts can be glued together but it's actually not needed, they stick together pretty well anyway.
License:
Creative Commons — Attribution — Noncommercial
Enely
