Therian Mask base

Therian Mask base

Update 08/09/2024:
I finally got a suitable fur. Here are some pictures of the process. I also added pictures to the Model Pictures. Mesh-like reinforcement fabric is used in the eyes.

Also, check out my lighter version Therian Mask 2, as well as the other masks I designed earlier: CatMask and VanillaSkyMask
 

Finish the model by sanding, painting and gluing fur to it. I recommend gluing the elastic band inside, a bit further from the edge. It is a durable solution and doesn’t press on the face.

A couple of pictures created by ai. I will update the pictures as the project progresses.

I think this is a pretty strong and light design. Used Polyterra PLA+. It is easy to sand and glue fur to it.

This model is scaled to fit a +10 year old. Measure the width of the head and scale the model to fit. You can also scale the model down if you want.

• Walls 3-4
• The looping edge of the mask has a thicker wall to make it stronger
• Tree Strong support to keep it still
• Mask weight is 65g
• Total filament mask and supports 101g
• Printing time 100% 3h2min