KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA.
It includes an AirTag compartment so you can bury it and find it with ease and a little print-in-place handle to carry it.
NEW VERSION IMPROVEMENTS:
LOCKER KEY FOR EXTRA SECURITY.
NO THREADS (sand gets stuck and blocks them sometimes)
BETTER AIRTAG LOCKING CAP
PRINT IN PLACE
STRONGER HANDLE
BIGGER AND POINTIER
Share your prints!!
(ASA or ABS is recommended)
It's recommended to use the print profile provided, supports are already in place and tolerances tested.
Assembly:
(This is an affiliate link)
1. INESRT THE SAND SHIELD ON THE LOCKER KEY
2. TIGHTEN THE LOCKER KEY FROM THE OTHER SSIDE WITH THE NUT
3. ALIGN THE METAL LATCH AND TIGHTEN THE SCREWTHE LATCH NEEDS TO BE ALIGNED WITH THE KEY LIKE SHOWN, TO LOCK IN PLACE.
4. AND YOU ARE DONE!
Maybe you will need to help the cap come loose with some plyers.
Follow me on:
Instagram: https://www.instagram.com/afo3d/
TikTok: https://www.tiktok.com/@afo3d
Youtube: https://www.youtube.com/@AFO3D
Licensing
All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.
Reccomended Print Settings:
- Tree Supports
- 0.2mm layer height
- 6 walls on the handle and cap
- PETG for the Sand Shield
-AFO
AFO3D
