Micro Shackle Hitch - Tiny Shackle

A simple to print variation of the micro ball hitch models out there.

I recommend printing in ABS.

• Supports only needed on the shackle itself (build plate only)
• Inner+outer brim recommended if using ABS
• Print orientations should come in correctly if printing from the site, or the included 3mf files.
• Variable layer height is set on the main body just to speed up the print
• 0.16 layer height on the shackle is recommended for quality, rest at 0.2 is fine.

I've included a separate file for a two-color pin if needed. Of course if you have a metal one, go ahead and use that.