1968 Camaro Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225x120.47mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:

Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Jade White
At layer #19 (1.6mm) swap to Dark Red
At layer #21 (1.76mm) swap to Red for the rest.

I suggest bright reds and this will show up very nice. Please as always share your own versions of a car that I adore myself

As with all my prints its a pretty thick base that won't bend like paper

Enjoy