Balrog - Lord of the Rings - HueForge

Gandalf: "I am the servant of the Secret Fire, wielder of the Flame of Anor..."

Gandalf: "The dark fire will not avail you! Flame of Udûn!"

Gandalf: "Go back to the Shadow!" Gandalf: "You shall not pass!"

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x141.96mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #16 (1.36mm) swap to Orange
At layer #26 (2.16mm) swap to Jade White for the rest.

 

Boost MeHelp me to improve myself making better things for you :)

How about buy me a coffee

buymeacoffee.com/spank7