Black Myth Wukong Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA SILK Eryone Silver Transmission Distance: 3
PLA PolyLite Brown Transmission Distance: 0.8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Silver
At layer #12 (1.04mm) swap to Brown
At layer #16 (1.36mm) swap to Silver

One of the best characters in gaming this year and a popular character in Chinese novel Journey to the West

I would suggest to use a silk pla in Silver for this one

I am always excited to see what you think

This is another high quality thick print that does not feel like paper but uses less black