August 26, 2024
Description
I have designed a catnip ball that resembles a Pokeball.
I have provided 2 sizes in the 3mf file for you to chose from.
The full sized one is 70mm in diameter and the smaller one I scaled to 70% in the slicer.
My cat has been playing with both sizes.
To assemble, glue the button onto the center band, place the band over one half of the ball, add the catnip, and thread the two halves together.
Layer Height: 0.16mm Stock settings
Infill: 15% infill
Material: I Used Overture PLA
Supports: Tree supports stock setting
License:
BY-NC-SA
christhielges
