August 28, 2024
Description
If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀
This is a token holder counter / tracker for Magic the Gathering. It is 7 separate parts: a bottom, 2x top parts and 4x dials to make 2x counters:
A special thanks to user @DaRealist for inspiring this design!
Boost MeShow your support by boosting this model. Any support is highly appreciated!For the dials, there is a left dial and a right dial. When positioned correctly, the numbers on each dial should line up (nearly) 100% straight inside the window. The parts are labeled in Bambu Studio as well.
The Token Holder's body should snap together while allowing the dial to spin. It does take a bit of force to fully snap the pieces together. Apply pressure at each connector on the top and bottom body pieces when snapping together for each dial. You will hear a bunch of snapping sounds, don't be alarmed (each connector snapped like 5 or 6 times for me). Once fully snapped together, there shouldn't be any gaps between any of the pieces.
The dials are a bit tight so the number stays in place in case of an accidental bump or drop. They will quickly loosen up a small amount after spinning each dial a few times. For even more security, try adding a small drop* of super glue to each connector when snapping all the parts together.
* If you use too much glue, the glue will seep out onto the dials and become glued in place and not be able to spin. Ask me how I know that… 😉
| Mana Counter | Commander Life Counter | 2 Player Life Counter |
| 4 Player Poison Counter | Storm Count Tracker | Energy Counter |
| Coat of Arms Tracker |
Be sure to check out my MTG 3D Print Projects page if you are interested in even more MTG prints like this from myself and other very talented makers!
License:
Standard Digital File License
4,319
TheMakerSphere
