August 28, 2024
Description
Star Trek LCARS screen Hueforge
The Model is 240x135mm in size.
This does not need an AMS to printed, if you dont have an AMS you can just replace the color changes in the slicer with pauses and change the filament manualy.
It is ok if you do not have the exact same color, any closest shade will still look great.
In the print shown in the pictures i've changed the red and white colors with glow in the dark substitutes. Picture 2 is under blacklight and picture 3 is the afterglow.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Bambulab Basic Cyan Transmission Distance: 8
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Red (substituted with glow in the dark red)
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to Cyan
At layer #19 (1.6mm) swap to Jade White for the rest (substituted with glow in the white/yellow)
License:
BY-NC-SA
Beni Stingray
