KrakenBox v2 AMS Version

This is an updated version of my “etched” KrackenBox for Magic the Gathering that allows for better multicolor filament usage. (https://makerworld.com/en/models/126057#profileId-136205)

This deck box was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for Token cards and such.

It fits in most of the deck box cases my friends and I have.

I would recommend running a purge calibration before printing to minimize on any waste. (You can use this handy one here: https://makerworld.com/en/models/112380#profileId-120319)

Or printing multiple at a time if there is need for multiple.

If you use the attached STL files. Note that the model for the tentacles has a small feature at the bottom of the base portion that keeps the height correct relative to the box when imported separately into slicers. Just be sure to color it appropriately to match the box so it doesn't show up on the bottom of the box.

Closed it is about 3" x 3" x 3.87"

Supports are not required

Check out the other models I have created, https://makerworld.com/en/@TigressAndFox

Please thumbs up if you enjoy this print.