September 29, 2024
Description
I designed this smart, (almost) solder-free lamp as a mood light. You can change colors, patterns and animations right from your phone without any coding needed. You can install the WLED-Software zo your ESP-32 right from your browser. You'll also need an 8*8 LED Matrix and some 3mm Acrylsticks which are cheaply sold as DIY-Lollipop holder. This project should be powered with at least 3A at 5V. I designed the base pice with a bit of tolerance, because the LED-Chips have a lot of manufacturing differences. You only need to solder the power and signal lines to the LED-Chip, I left enough space in the basepart to allow for sloppy soldering.
Print this with fuzzy skin at .3mm for hiding Layerlines and a better fade between the two base parts. The two baseparts can be glued or screwed together if you heat-press some theads into the upper-bottom part. Hit me up if you have any further questions or need the CAD-Files.
The junction-box is as rudimentary as it gets, because I'm really bad at soldering and really good at using WAGO-Clamps (feel free to solder it anyways!)
:)
Boost MeSaving up for an A1!
List of parts with non-affiliate links - feel free to get the parts at your dealer of choice
License:
BY-NC
Prokarus
