Sabrina Carpenter dual panel hueforge

My daughter is what a I call a Carpie – a Sabrina Carpenter fan. I created this hueforge dual panel print for her room after I printed her a Taylor Swift and she loved it so much she asked for another of her favourite popstars. This print uses a gold and bronze to give a warm, shiny, luxe look that I really like. The frame used in the pictures can be found @CanadianGamer. 

Please join my Patreon for commercial license use. By the way, if you like the absolutely stunning Taylor Swift multipanel pictured in the photos, she is also exclusively available only to my Patreon community! 

----------------------------

A Commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

As part of your membership you will also have access to exclusive files available only on Patreon.

----------------------------
 

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x400mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

6 Filaments Used:
PLA BambuLab Basic Black
PLA Bambu Basic Bronze 
PLA BambuLab Matte Dark Brown
PLA BambuLab Basic Beige
PLA Bambu Basic Gold 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Bronze
At layer #17 (1.44mm) swap to Dark Brown
At layer #20 (1.68mm) swap to Beige
At layer #22 (1.84mm) swap to Gold
At layer #25 (2.08mm) swap to Beige
At layer #27 (2.24mm) swap to Ivory White for the rest.