Super Fancy Remix of the Hextraction Game Board

This is Super Fancy Remix of the Hextraction Game Board by Inaudable with all the settings and plate you will need to print in order to build a board for Hextraction game and all the gutters to have your balls picked up when they “escape” the board for some reason.

Use the 2 print profiles with 7 total 256x256 plates.

• 6 plates with a regular profile (0.2 layer height, 2 walls and 15% gyroid infill).
• 1 plate with a strong profile (0.2 layer height, 3 walls and 40% gyroid infill)

No printing support is needed thanks to the author's rework. 

The baseline, headache-free design, with 5 lines is the one you will get with this model.

Warning: the picture in illustration are for a 6 lines version of the board. What you get by printing this model is a 5 lines version by default. If you want bigger game board (like on the picture, with 6 lines) you can print 2 big plates instead of one and adapt the parts numbers accordingly, but you will have to manage support yourself (for example the Gutter Leg Mounts are not adapted to this 2 large plates setup). 

Be careful to glue things in the correct order:

1. Glue plate 1 (big) with plate 2 (small)
2. Glue underneath gutters and half gutters, knowing that no gutter goes outside of the plates
3. Side gutters by applying large band of glue below hole
4. Leg supports (each is specific for its own side)
5. Starting ramps
6. Top middle gutter
7. Goals

Check original model instructions if your need a different perspective and help on how to glue the optional holders.

The optional coins and holders from the original model are not in included (Coin.stl and CoinHolder.stl).

The illustration picture includes tiles you can find here:

• https://makerworld.com/en/models/464662#profileId-376164 
• https://makerworld.com/en/models/477241#profileId-388278