孔雀鱼漂浮繁殖盒/Guppy floating breeding box

新改进！调整了参数，增加了稳定结构，更方便打印了！支撑依据自己的材料勾选。能完美打印了，除了材料拉丝……

New improvements! Adjusted the parameters, added a stable structure, more convenient to print! Support check according to your own material. It prints perfectly, except for material brushed...

将繁殖盒漂浮于水上，将待生产的母鱼放入，鱼苗出生会从底部缝隙游出到外部，从而将母鱼隔离，避免刚出生的鱼苗被母鱼吃了。

85*85*65mm

墙生成器不能用经典！！漂浮圈内部是中空的 很薄 不能经典（迷茫了，到底咋调啊）！也不能添加支撑！就算切片软件提示漂浮圈有悬空也别管，直接打印或者屏蔽支撑。

85*85*65mm

When the breeding box is floated on the water and the female fish to be given birth is placed in it, the baby fish will swim out through the bottom gap, thus isolating the mother fish and preventing the newborn fry from being eaten by the mother fish.

Wall Generator cannot be used with classic!! Floating circle inside is hollow very thin can not classic (confused, in the end how tune ah)! Can't add support! Even if the slicing software indicates that the floating ring is suspended, don't worry about it, just print or shield the support.

In fact, in order to float, the material is very thin, and the overhang is not easy to beat, to be precise, really difficult to beat ah! Fish friends have the perfect printing experience to share... I played a bunch of test pieces, pla is not very good, petg parameters are really difficult to adjust, the inclined plane is always broken, tired, work together hahahahaha