Espresso Tamper (51mm)

This is a coffee / espresso tamper. The design is for a 51mm portafilter. It is a simple design and easy to print.

I used Esun PLA+ and PETG to print this but you can use any other filament pretty much just make sure to change the settings in your slicer (not food safe I know, you can use your foodsafe filament if you desire.)

Post Processing (Optional but recommended for a better look, I have added adaptive layer height):

Sand from 120-200-320-400 grit and then polish/wet-sand with 600-1000-2000 (you can skip some of the in btween grits if you feel it's unneccesary).