Tupac on the mic hueforge

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

 

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.3

PLA BambuLab Basic Silver Transmission Distance: 2.8

PLA BambuLab Matte Ivory White Transmission Distance: 3.9

This print uses 3 unique filaments

 

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Silver

At layer #19 (1.6mm) swap to Ivory White for the rest.

 

!!! PLEASE POST YOUR PRINT RESULTS IN THE COMMENTS !!

Boost MeFeel free!