Geto - HueForge - Jujutsu Kaisen

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 123.75x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal
At layer #18 (1.52mm) swap to Latte Brown
At layer #20 (1.68mm) swap to Ivory White for the rest.