Suguru Geto - Jujutsu Kaisen (anime)

This 3d model was generated using AI!🤖.

The print is oriented at a -36.23° tilt, uses automatic supports, and a couple of extra supports on the soles of the feet.

The print was tested on a P1S. If you feel that the tilt angle is too steep, you can try printing it without rotating the model, although this will generate many more supports on the lower area of the head (the chin). By rotating it, only the back of the head becomes more exposed when removing supports, and overall it is less noticeable and easier to work with during post-processing.

The total height of the model is 11 cm = 10 cm (body and part of the hair) + ~1 cm (bun).

If you like Jujutsu Kaisen, there are others models with funko pop style!

Print Instructions

General Print Settings

• Nozzle: 0.4 mm

• Layer Height: 0.16 mm (Bambu High Quality profile)

• Wall Loops / Perimeters: 2

• Detect Thin Walls: Enabled

• Infill: 12% Gyroid

• Material: PLA+

Support Settings

• Support Type: Tree Support

• Support Angle: 25°

• Support Placement: On build plate only

• Manual Supports: I always add manual support on the shoes,

All photos of the model are real and have not undergone any kind of editing other than the camera’s own processing (JPEG). Different angles are included to show the most accurate result possible.