Creality Space Pi Dessicant Tray

Wanna get the Moisture out of your Filament without having the Lid Open? Then you need some Dessicant in your Dryer!

Boost MeLike my Work? Share a comment, a make or even a boost. I appreciate every single one of it and it helps me to keep up the Work :) Thanks alot

In order to use a Dessicant Tray in my Creality Space pi, i needed a special Box to use it in combination with my PTFE Guide Mod which i installed on my Space pi. So, i came up with this one. It holds a good amount of dessicant so that it has enough Silica to take the Moisture out. Also it has a Slot in the Front to give way for the PTFE Guide and the PTFE Tube itself. So, you can use both my mods together without havin Trouble to get them Wok Properly. Have Fun using it.

 

Features: Dessicantcontainer with Lid to hold a good amount of Dessicant. I printed it in ABS but also provide a Profile for PETG-CF and PETG. You need to Print it in a Filament which can withstand at least 70 degrees. Thats the Max Output the Space Pi has. PETG and PETG-CF is right on the Edge in terms of withstanding 70 degrees. I tried it, it worked but my trust in it is not enough. So, i wanted to go the Extra mile and Printed it in ABS.

 

 

Slited Front for my PTFE Guide mod: To be able uisng both my Mods for the Space Pi at a time, i added the Front Slot to make room for the PTFE Guide and its PTFE Tube. Try using them together, its a perfect combination.

Heres the Link to my PTFE Guide: https://makerworld.com/en/models/619511#profileId-543467

 

 

Have fun Printing it, cant wait to see your Makes and hear how you like it. Thanks alot