Terrifier Art the Clown Greyscale Picture

Terrifier Art the Clown Greyscale Picture

Colors can be changed to come up with interesting mixes!

AMS Ready - Color changes can be manually swapped.

A1 Mini - Scale down on X/Y axis only. DO NOT adjust Z height!

If you get “floating regions” warning, that can safely be ignored and doesn't require supports.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.4mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.

Any questions or requests, please ask!

Please leave a review!