Filament Sign by sharky

Do you knew the problem?

Empty filaments but can't remember where you got them from.

I found on the web a pretty good label system with an included IOS-software to translates Web-URL's into QR-Code. 

(The QR-Code works well with the right angle, you can test in on Picture 3)

So I bought a cheap Nimbot B1 for about 33 €.

It had a role labels with 50 x 30 mm included, so I designed my labeling system with this size.

I also don't like to waste much material, so I designed my labeling system to reuse on of the filament calibration pieces.

(If you have no calibration-piece, I also added a printable piece on plate 2 which fits perfectly in my storage system)

Additional I tried to use as less filament as possible. - So I had very much ideas and proto-types. 

The result is now: One sign will only use 7.75 g filament.

If you redesign it, please add a note to my original-design. - Thanks.

So have fun with my labeling system. 

May the power of storage be with you ;-)

Update: First design was for my wall mounted spool with 28 mm wooden stick https://makerworld.com/en/models/819282#profileId-762088

Because I got a request I uploaded an additional model for use with 1" (24.5 mm) wooden stick.