(V1.1!) CounterCounter, TWO 0-99 counters, no AMS!

Trimmed down version of my original CardCounter. (Found here)

New Version 2 →HERE

Two 0-99 Counters in a simple small package!

Use them for keeping count of… anything really. Changing power and toughness, number of tokens, attacking or defending, planeswalker loyalty, health and commander damage…

Whatever you might need it for. Or use it for whatever other game that might benefit from it.

 

Original print profile has been tuned for good results but stl is also available.

If you have a 0.2mm nozzle use it to print the number wheels, you get more detail!

Boost MePlease remember to boost if you find my creations useful. Most of them have taken tens of hours of work and I'm sharing them for free.

 

Assembly:

1. Number dials are different sizes and each has their own place and orientation (picture). Insert them on the plates.

    

2. Take the top plate with its dials and place it over the Base plate. (If your print is loose and the dials try to fall off, it's easiest to hold with two hands and support them with your index fingers beneath from the sides. You can bend the structure a little.)

3. Press the pieces together.
4. Make sure that the dials are seated and turn properly before the next step (And that they are the right way around).
5. Insert the two pins, locking everything together. (If the pins come out wrong size from your printer you can scale them in X and Y axis to tune the fit.)