Xiaomi Temperature and Humidity Meter 2 Bracket V2

为我助力设计不易，如果有用，麻烦免费助力一下，谢谢

This Mi Home Temperature and Humidity 2 Bracket is suitable for multiple scenarios and can be adjusted from multiple angles. It is very practical and has the following specific features:

Multiple installation methods: 1) Paste wall mounted; 2) Magnetic wall mounting; 3) Desktop placement.
Multi angle adjustment: It can pitch at a larger angle for better visual effects.
Fast printing takes only about 30 minutes and less than 10g.
Attention: Magnetic attraction requires 4 magnets with a diameter of 5mm and a thickness of 2mm.

Installation method: Simply insert the protruding shafts on both sides of the bracket into the matching holes of the support ears on both sides of the base, and then slightly pinch them towards the middle. If you feel that there is a high resistance to rotation, you can rotate them back and forth a few more times.

 

此款米家温湿度2支架适用于多个场景，可以多角度调节，很实用，具体特点如下：

• 多种安装方式：1）粘贴壁挂；2）磁吸壁挂；3）桌面摆放。
• 多角度调节：可以较大角度俯仰，可视效果更好。
• 快速打印，仅需约30min，不到10g。

注意：磁吸需4个直径5mm×厚度2mm的磁铁。

安装方法：仅需将支架两边的凸起轴，配合插入底座两边支耳的配合孔，然后稍用力向中间捏紧，如果觉得转动阻力较大，可以多来回旋转几次。

 

In addition, a new hot bed shovel blade has been designed that can quickly replace the shovel head, is practical, and saves consumables. You can now achieve shovel freedom. Welcome to download it. The specific link and introduction are as follows:

热床刮刀—快速更换刀片 来自 佳洋创客 - MakerWorld