November 20, 2024
Description
This is a Hueforge print.
Project: ornament_powersword.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 64.07x200mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 2.5mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kingroon Silver Transmission Distance: 2.1
PLA elegoo Yellow Transmission Distance: 5.9
PLA Kingroon White Transmission Distance: 3.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Silver
At layer #19 (1.6mm) swap to Yellow
At layer #26 (2.16mm) swap to White for the rest.
License:
Standard Digital File License
MythicPrints
