屏顶扩展：展示台
在推出“屏顶扩展：耳机架” ( https://makerworld.com.cn/zh/models/630791 ) 后，一些朋友希望进一步利用屏幕上方的空间，比如放个小手办啥的。于是，我设计了这个屏顶展示台。
- 展示台分为平台和显示器挂钩两部分，分别打印，通过卡扣连接。
- 平台提供了15cm和20cm两种长度，以及松 (0.15mm)、紧 (0.1mm) 两种公差。
- 如果平台和挂钩都采用哑光等表面粗糙的线材打印，建议尝试大公差的模型。
- 如果其中一个使用金属、丝绸等表面光滑的线材打印，建议尝试小公差的模型。
- 挂钩提供4种尺寸，可以适配厚度为18mm、19mm、20mm和21mm的显示器。
- 平台上间隔5cm预留了方孔，可以扩展插上自定义的文字或图像标牌。本设计提供了两个空白模板，您可以自己在上面定制。
- 平台底部的卡扣虽然有悬空，但打印时可以不用加支撑。打印效果可以看附加的图片。
祝打印快乐！
Monitor Top Extension: Demo Platform
Following the release of "Monitor Top Extension: Headphone Holder" ( https://makerworld.com/zh/models/777331 ), some friends wanted to make better use of the space above their monitors, such as showing garage kits. So, I designed this demo platform mounted on the top of monitors.
- The design consists of two parts: the platform and the top holder, which are printed separately and connected via snap-fit connectors.
- The platform has two length options (15cm and 20cm), and two tolerance options (loose-0.15mm and tight-0.1mm).
- If both platforms and holders are printed with matte or rough-surfaced filaments, try the loose tolerance model.
- If either part is printed with metal, silk, or smooth-surfaced filaments, try the tight tolerance model.
- The holder comes in 4 sizes to fit monitors with thicknesses of 18mm, 19mm, 20mm, and 21mm.
- Square holes are placed at 5cm intervals on the platform for optional customized text or image plaque. This design includes two blank templates for your customization.
- Although the snap-fits on the bottom of the platform have overhangs, they can be printed without supports. See the attached images for print results.
Happy printing!
techeditor
