November 24, 2024
Description
Project: couple.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Jade White
At layer #7 (0.64mm) swap to Red
At layer #15 (1.28mm) swap to Black
At layer #16 (1.36mm) swap to Jade White
At layer #22 (1.84mm) swap to Orange for the rest.
License:
BY-NC-SA
Macik
