Santa At Work, Christmas Diorama

Description

A festive Christmas Santa at work diorama. I have included a few options for printing to best fit your needs.

LED Flame Tea Light Candle provide a nice feel of movement and warm light.

 

 

Features:

• Easy accesses to base of tea light candle to switch them on and off.
• Option to have a base with battery powered tea light candles and a simple one without them.
• Parts are interchangeable with my Christmas Wonderland Diorama.

 

Things of note:

• This print is made to have a tight friction fit and depending on how accurate you printer is it may be to tight. If so a little sanding may be needed on the edges.
• includes retention clips for the LED tealights but if you are using tealights that are larger then the ones indicated below and that do not fit the clips then print the non clip model and glue in place.

 

 

Printing:

I recommend using textured PEI build plate to give the nice textured finish.

Ether print with 0% infill so as light shines through you will not see infill geometry or 100% infill so that light will not shine through.
 

When printing with PETG i found the top layers where no good so i have included a modifier to have infill just where it is needed to fix this problem. If you are printing in PLA this is not needed and can be deleted by selecting objects tab and then selecting Generic-Cube and deleting it this will save you some printing time and filament.

 

 

Last and most important of all have a Merry Christmas!!

 

Boost MeIf you like this print a boost is always welcomed :)