November 26, 2024
Description
This is a Hueforge - you may resize the X Y axis. ! Do not change the Z axis !
An axe made from the scales and wing bits of a dragon. Fun TTRPG bookmark!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x153.76mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA elegoo purple Transmission Distance: 2.8
PLA PolyLite Pro Orange Transmission Distance: 7.5
PLA elegoo Yellow Transmission Distance: 5.9
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #15 (1.28mm) swap to purple
At layer #16 (1.36mm) swap to Red
At layer #18 (1.52mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow for the rest.
License:
Standard Digital File License
MythicPrints
