December 3, 2024
Description
A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear.
The stepped inner surface improves light-blocking performance.
This design fits CANON EF/EFS lenses with a diameter of 58 mm.
This hood is 70 mm long, and works well for focal lengths of 75 mm and above when used with an APS-C sensor (14.9 x 22.3 mm).
We tested it using a CANON Zoom Lens EF 75-300 mm 1:4-5.6 III using an EOS 1300D.
Check out our collection of 3D printable designs for Photography!
This part does not require support materials. We printed it in matte black PLA, at 0.2 mm layer height, but you can print it in any material you want! ASA does very well under direct sunlight exposure for long times.
Optionally, there's a detachable accent color ring you can snap-fit at the base of the hood as a decoration.
NEW: includes version for 3 and 2 tabs mounts and test pieces. Check the fit first using the test pieces before committing to the full print!
If you really like what we are doing and want to support us, you could buy us a coffee or two!
It helps us continue creating usable things for 3D printing.
License:
BY-NC-SA
TwoThingies
