Spinning Jinx and Ekko rose necklace - Arcane

70mm diameter - Spins

AMS used but optional, can find both print print profiles.

IMPORTANT: the top/bottom surface patter is important for the finished result, I found that Archimedean Chords are a good fit. The quality can be improved by using a smaller nozzle.

The assembly is simple and no additional material is required.

• Attach the two caps, optional superglue

• Insert the two “neckdecor” parts inside the inner ring: there is a slight interference so no glue necessary
• Optional: if the inner ring is not rotating properly, unstuck it manually by removing it from the outer ring, sand lightly and you're good to go!