Arched Wine Bootle Holder

Arched Wine Holder

 

NEW CHRISTMAS HOLDER (Snowman)🤶 https://makerworld.com/en/models/889656#profileId-845824

 (Christmas Tree) 🌲 https://makerworld.com/en/models/900091#profileId-858911

 

I created a model for a arched wine bottle holder, but it also works well for other alcoholic beverages or bottles. The holder is designed to keep the bottle at the correct angle, with the center of gravity of the bottle and the holder positioned perfectly above the base. This arrangement ensures balance, making the bottle appear to "levitate."

 

The opening has a diameter of 33mm, making it suitable for bottles of various sizes and weights. Proper positioning is all it takes to make the setup stable. For the hole, it is necessary to set up supports.

 

It is recommended to use full wine bottles of 750ml or larger, as the holder will work seamlessly with them. For 500ml bottles, it is advisable that they have a longer neck. In such cases, they will also stand stably, as shown in the photos.

It can also hold a 2.5kg dumbbell bar! :)

 

Settings:

• 0.20 mm layer
• Elephant foot compensation: 0.15
• Infill: 10 % Gyroid
• Seam position: Back
• Support: tree (auto) for the hole
• No brim

Check out my other wine holder models:

• Board https://makerworld.com/en/models/849138#profileId-796737

• Snowman https://makerworld.com/en/models/889656#profileId-845824

  
  It is suitable for all types of bottles, regardless of their weight.

 

Boost MeIf you like my designs, boost me!