Starlink Mini Mount Quick Clamp

I created this mount bracket to easily mount and remove my Startlink Mini while camping or visiting BNB's.

It will fits on a lot of common Quick Clamps and because the Starlink mount screw pushes agains the clamp and not the 3D printed body, it can be fastened really tight without a problem. You will be amazed how sturdy this is!

 

I created two versions, one for a 19x6mm grip, one for a 16x5.5mm grip and one for a smaller 13x5mm grip. Let me know if you need other dimensions as well.

 

I did not think of this solution myself. I was inspired by @jeepxl solution that can be found here. https://makerworld.com/en/models/687704

That solution will allow you to fasten the clamp in an angle and still mount your Startlink. Really nice.

 

Keep in mind that there are two types of Starlink Pole mount these days. 

The older type is the 54mm version (SPX-04171000-515) and has a knob for fastening.

The newer type is the 52mm version (SPX-04176000-501) and has an allen key for fastening.

There is a separate print profile for each of them.

 

I recently created a new variant of this model that fits on a Parkside Quick Clamp. The model can be found here: https://makerworld.com/en/models/2800919-starlink-mini-mount-for-a-parkside-quick-clamp

Boost MeAppreciate the model? Please give it a boost.