Ruffy / Luffy One Piece Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
 

You may print at higher layer heights below the Min Depth of 0.48mm
 

The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Dark Blue Transmission Distance: 1
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Red Transmission Distance: 4
 

This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Dark Blue
    At layer #9 (0.8mm) swap to Jade White
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Jade White
    At layer #15 (1.28mm) swap to Red
    At layer #16 (1.36mm) swap to Blue Gray
    At layer #18 (1.52mm) swap to Red for the rest.