Painters Cup

This painters cup is my first model designed in Fusion360, proud of this one. This is for my son who loves to paint and thought I would share with the community. Will hold 6 paintbrushes with a hole diameter of 10mm width and holds a paint brush on top of the cup horizontally up to 9.5mm width. The painters cup is 100mm height and width, and a 5mm wall thickness. 

 

I tested with water for 16 hours and hasn't leaked and might hold water for a longer time. I printed in PLA plus with 3 wall thickness and 15% infill. I haven't tried PETG filament to be water tight. I was close to running out of YouSu PLA plus gray filament and changed to an Elegoo PLA plus gray filament brand during the print is why the color difference near the top.

 

Here is the link to painters cup version 2 https://makerworld.com/models/952049 

Boost MeIf you like this model and want to support this creation, please give a rating, comment, or a boost. ThanksMembershipTo support my current and future model designs, consider purchasing a commercial license from the link in my profile.

 

Buy Me A Coffee

https://buymeacoffee.com/foxmt406