Coffee weigh scale holder / stand

Boost MeDo you like this model? Don’t hesitate to boost my model – it doesn’t cost you anything and you will be supporting my work so I can create more models like this one… Thank you!

I have designed this stand to properly be able to use my coffee weigh scale to weigh the amount of coffee coming out of my coffee machine and to be able to set up the extrusion time of the machine. Without the stand the weigh scale can't be level or would even slide off the slope of the coffee machine. The weigh scale holder height is designed in a way that it doesn't reduce the available height for a cup, too much (you only lose ca. 4mm). Note: You need to remove the bottom cover of the coffee machine.

 

Quite a simple print, no supports required. I printed this in PLA. PS: If you wonder: I get the carbon fibre like pattern on the top of the print (which is located on the print plate during printing) using the Bambu 3D Effect Plate (with the carbon fibre pattern.

 

Some references:

My coffee machine is a De'longhi Dedica Style EC685.M

My weigh scale is this one, it has an accuracy of +/- 0.1g

 

Have fun printing this!