Creality Falcon 2 alignment feet spacers V2

Have you gotten fed up with the honeycomb workbench sliding around under your Falcon 2?  If so these spacers will align everything. The 4 spacers fit in the corners of the Falcon 2, the lower aluminium sheet is aligned, next the honeycomb and finally the Falcon 2’s feet fit through the holes in the spacers to lock it all together. This way everything is held in place and correctly aligned.  I have included screw holes so they can be attached to the surface the Falcon 2 is standing on if required.

I have also made similar feet that also align the protective cover if you have one, see: https://makerworld.com/en/models/629053#profileId-553744