Hasbro Ghostbusters Trap Container 2 in the Box

For all of you who, like me, don't know where to put the accessories for the Haslab Ghostbusters Trap, I've built a little something.

The container can be plugged into the end of the docking station stand.

No screws are required for the container.

The hinge is simply fixed with a piece of filament.

You can choose between 2 options:

1. Small container for 2 rods an 2 plugs with a smaller lid
2. big container for up to 6 rods and 2 plugs with bigger lid.

The basic conatiner and the insert are the same.

If you decide to print the smaller version, you can “upgrade” to the bigger one with just printing the bigger lid and the additional upper insert for 4 more rods. 

UPDATE January 06 2024:

1:

As some of you asked if they could put more than 2 Rods in the storage box (because many of you bought or printed them), i added a now box for you.

For the ones of you, that already printed Version 1 of the box - I AM REALLY SORRY! but the upper Rod Holder, wont fit in Version 1 of the box.

I admit - i made a mistake there.

2: I decided to seperate the inner Rod holder from the box. You can now put the rods in front position get get them in and out a lot easier.

3. I designed a new bigger lid, to get the possibility to have 4 aditional Rods in the box with:

4. The new Rod holder. 

Just place it over the one in the box

So you have now 2 options:

1: Small box for 2 Rods and two plugs

2: Big box for the above plus 4 Rods

Happy printing, and happy hunting