Odds and Ends Drawers for Riser V2

I looked at a bunch of accessory drawers for the AMS riser, but none of them seemed to fit my particular needs, so I used the blank drawer to customize what I feel is a efficient layout.  The Ends drawer is for everything hotendy, with wells for 4 complete hotends, plus extra screws and boots. Thermistors, heating elements and clips, Thermal grease ( although this well can alternately hold 2 unmounted hotend fans. A well for a spare extruder, nozzle cleaning rods, lubricants, and easy access allen wrenches, with 2 slots for 1.5mm because I have one I use exclusively for pulling stuck filament out of hotends. There is also 3 custom wells for the 3 small tools by K2_Kevin. With optional magnet recesses to hold them in place if you put magnets in yours. There are also 3 other wells for small screws and other bits. the two smaller one have scooped front sides to facilitate getting small parts out. It has wells for cutters and wipers, too.

The Odds drawer is more filament oriented and has space for small flush cutters ( with catches to hold it slightly closed so it won't spring out of its recess ) A small needle nose pliers, and an AMS PTFE disconnect wrench, as well as a slot to hold spare AMS length PTFE tubes, a recess for AMS compliant filament clips ( like the ones I published ) another I use for the soldering iron ends for setting threaded inserts. A well large enough to hold most available scrapers plus some fine point tweezers, and any other loose item, plus a well for spare scraper blades. 

There is a large slot that will hold exactly 2 glue sticks, but of the 3 different brands I had lying around, only Bambu brands glue sticks are small enough to fit in an AMS Riser V2 height drawer. 

ETA- on request I added a 3mf file for the pictured drawer fronts, including the shortened drawer fronts.  Change the filament colors to your primary and accent colors, and under objects, assign the accent color to the text objects, look under the plate to see the text in place.