Allsky case for Raspberry pi4 and HQ camera

January 7, 2025

Description

This is my allsky case design for Raspberry pi4 with Raspberry pi HQ camera with POE for taking pictures of the sky.
For 50mm pipe.

I have printed it in ABS but i think other materials would be fine as long as you protect it with UV protection and that will stand the heat in the summer.

Glue the dome and covers with some silicone seal to make sure it will not leak into the elctronics.
What i have used :
4 pcs heat insert M3 x 4 x 4,5
12 pcs heat insert M5 x 6 x 7
9 pcs heat insert M6 x 5 x 8
3 pcs Vent with membrane M10x1,5
4pcs M6x10 for pipe bracket
3pcs or 6 pcs M10x15 for holding in place on the pipe
12 pcs M5x16 for the Base lid
5Pcs M6x12 for the Dome lid
12 pcs M3x30 Standoff male/female
4 Pcs M3x8 Screw
4 Pcs M2.5x12 Standoff female/female
4 Pcs M2.5x6 Standoff female/female
8 Pcs M2.5x5
M2x1.5 Cable gland or M20 RJ45 connector

Dome i have used

Transparent Protective Case Camera | Surveillance Camera Dome Glass - 4 Cctv Camera - Aliexpress

Boost Me