Toolhead Cable Guide A1-mini

Designed as a support for toolhead cable, tried to make it as light and precise as possible.
The model might be useful for u if you're trying to mitigate any tension at any angle of a toolhead cable.
Weight of 1.2g and 0.05-0.1mm tolerance, and prints within 15 mins(depending on your settings)
You can use any settings honestly, it prints perfectly with 0.2mm layer height i used this as an experimental to see the tolerance but height didn't really affect the model, my example used 0.12 layer height for a smoother finish, which I really suggest. Also used 2 walls and 15% infill there is not much to infill, the model will be sturdy by default because of the thin walls.