BLDC 3 Phase Brushless Motor High RPM

Boost MeLeave a Free Boost For this educational and cool model!

Check out V2: https://makerworld.com/en/models/2287603-bldc-brushless-motor-7-500-rpm-3-phase-high-rpm#profileId-2495581

 

Very high RPM simple 6 coil 8 magnet Brushless Dc motor

 

Parts Needed:

(1) ESC with potentiometer https://a.co/d/bNlHY0E

(16) 10x2mm Magnets https://a.co/d/80iXdpF

(1) 100g Spool of magnet wire 0.9mm https://a.co/d/egsbEMj

(6) M3 >20mm Bolts and nuts

(1) M3 ~35mm bolt and nut

(2) 16x5ODx5mmID Bearings https://a.co/d/f2JlWLS

1. Wrap ~11g of Magnet wire around each coil
2. Glue the magnets into the rotor 8 on each side, alternating polarities
3. Glue the bearings into the stator with one on each side of the stator's inner spacer 
4. Wire the coils together according to the diagram
5. Connect the three wire from the coils to the three ESC wires.
6. Turn potentiometer all the way to the left, plug in the ESC to 15v 2A, don't touch anything until the beeping is done, slowly turn the potentiometer to the right until it starts shaking, then spin the motor and it should keep spinning, from there slowly increase the speed.